Latest News

Practical Course on WSNs (Lab)
The next course takes place from 28 November - 03 December 2019 More

New Equipment
The sensorlab has received various new equipment to allow for wider and easier study of all things related to WSNs. More

Contents

SensorLab Hardware

A full inventory of hardware can be found on the wiki.

IRIS motes

Crossbow IRIS Sensor Nodes & Base Station

  • Radio communication on 2.4-2.48GHz ISM band, IEEE 802.15.4 compliant.
  • 250kbps data rate.
  • Range up to 50m indoors and 500m outdoors.
  • Atmel ATmega1281 based.
  • 128KB program flash, 512KB measurement flash, 8KB RAM.
    • ↑  

    MIB520 USB Gateway

  • USB programming for IRIS and other sensor nodes.
  • USB bus power.
  • Usable as for base station purposes.
    • ↑  

    MDA100CB Sensor Board

  • Light sensor: CdSe photo cell
  • Temperature sensor: YSI 44006 thermistor
  • Prototyping area: For connecting further sensors and devices
    • ↑  

    MDA300CA Sensor Board/General Measurement Platform

  • Low-power wireless instrumentation
  • Versatile use in various areas such as weather measurement systems, agricultural and irrigation control, habitat monitoring, soil analysis and remote process control.
    • ↑  

    MTS310CB Sensor Board

  • Microphone
  • Sounder: 4kHz fixed frequency piezoelectric resonator
  • Light sensor: CdSe photo cell
  • Temperature sensor: Panasonic ERT-J1VR103J thermistor
  • 2-Axis Accelerometer: Analog Devices ADXL202JE
  • Two-Axis Magnetometer: Honeywell HMC1002
    • ↑  

    MTS400CC Sensor Board

  • Dual-axis accelerometer: Analog Devices ADXL202JE
  • Barometric pressure sensor: Intersema MS5534AM
  • Ambient light sensor: TAOS TSL2550D
  • Relative humidity & temperature sensor: Sensirion SHT11
    • ↑  

    MTS420CC Sensor Board

  • Dual-axis accelerometer: Analog Devices ADXL202JE
  • Barometric pressure sensor: Intersema MS5534AM
  • Ambient light sensor: TAOS TSL2550D
  • Relative humidity & temperature sensor: Sensirion SHT11
  • GPS module: ublox LEA-4A
    • ↑  

    Advanticsys motes

    AS-XM1000

  • TelosB compatible
  • Microcontroller: MSP430F2618
  • Communications: IEEE 802.15.4
  • Radio transceiver: TI CC2420
  • Light, temperature and humidity sensors
    • ↑  

    MTM-CM3000-MSP

  • TelosB based
  • Microcontroller: TI MSP430F1611
  • Communications: IEEE 802.15.4
  • Radio transceiver: TI CC2420
  • Reset button
  • 3 LEDs
  • Hirose® 51-pin connector
  • External antenna
    • ↑  

    MTM-CM3300-MSP

  • Similar to CM3000
  • Radio with addditional amplification (LNA)
  • DC input for power supply
    • ↑  

    MTM-CM4000-MSP

  • Similar to CM3000
  • Hirose® 51-pin connector
  • No external antenna
    • ↑  

    MTM-CM5000-MSP

  • Similar to CM3000
  • No 51-pin connector
  • Temperature sensor
  • Humidity sensor
  • Light sensor
    • ↑  

    SG1000

  • 802.15.4-Ethernet bridge
  • Sink node image reprogramming
  • 4 USB ports
  • Internal database and data storage
    • ↑  

    MTI USB1000

  • Connect CM3000 and CM3300 motes to PCs via USB for programming
    • ↑  

    MTS DS1000

  • Temperature sensor
  • CO & CO₂ sensors
  • 51-pin connector
    • ↑  

    MTS EM1000

  • Sensor expansion board
  • Light sensor
  • Temperature and humidity sensor
  • Acceleration sensor
  • 51-pin connector
    • ↑  

    MTS EX1000

  • Sensor expansion board
  • 4 ADC ports
  • 2 RS232 ports
  • 2 VoltAmp ports
  • 51-pin connector
    • ↑  

    MTS SE1000

  • PIR sensors
  • Magnetic sensor
  • Microphone
  • 51-pin connector
    • ↑  

    MTS CO1000

  • Sensor expansion board
  • Sensors for force, load, vibration and angle variations
  • 51-pin connector
    • ↑  

    MTS AR1000

  • Sensor expansion board
  • CO, CO2 and dust sensor
  • 51-pin connector
    • ↑  

    SH-300DX

  • SOHA-TECH CO₂ sensor
  • Output 0-3V
    • ↑  

    Impinj RFID kit

    Impinj Speedway Revolution R420 RFID Reader

  • Network attached RFID reader
  • 4 antenna connectors
  • Up to 32 antennas using antenna hubs
  • High transmit power
    • ↑  

    Mini Guardrail Antenna

  • UHF Gen2 RFID tag compatible
  • Frequency range: 865-954 MHz
  • Effective read distance of 7.5cm or less
    • ↑  

    CS777-1 Brickyard Antenna

  • Near Field Antenna
  • UHF Gen2 RFID tag compatible
  • Frequency range: 865-868 MHz
  • Nominal range of 15-40cm, actual range up to about 2m.
    • ↑  

    S8658PR Antenna

  • Far Field Antenna
  • UHF Gen2 RFID tag compatible
  • Frequency range: 865-868 MHz
    • ↑  

    Identive NFC kit

    Identive NFC USB Reader

  • Contactless and portable NFC Reader/Writer
    • ↑  

    SCM3712 NFC Reader

  • Contactless NFC Reader/Writer board
  • Specifications: Link
    • ↑  

    Waspmotes

    Libelium Waspmote Sensor Node

  • 7 Analog Inputs
  • 8 Digital I/O
  • 2 UART
  • 1 USB
  • Socket for basic sensors Temperature, Humidity, Light
  • Specifications: Link
    • ↑  

    Gases Sensor Board

  • Board which can be used with different gas sensors
  • Specifications: Link
    • ↑  

    Smart Cities Sensor Board

  • Extendible board for smart city measurements
  • Specifications: Link
    • ↑  

    Prototype Sensor Board

  • Experimental testing board
  • Specifications: Link
    • ↑  

    Agriculture Sensor Board PRO

  • Extendible board for agriculture measurements (temperature, soil moisture, solar radiation, etc.)
  • Specifications: Link
    • ↑  

    Events Sensor Board

  • Extendible board for pressure/weight, vibration, impact, tilt, temperature, water leakage, luminosity and presence (PIR) sensors
  • Specifications: Link
    • ↑  

    Waspmote GPRS PRO Board (SIM900)

  • Make and receive calls
  • Send and receive SMS
  • Quad-Band: 850MHz/900MHz/1800MHz/1900MHz
  • Specifications: Link
    • ↑  

    Waspmote GPS Board

  • Simple GPS module which provides information on: latitude, longitude, altitude, speed, direction, date/time and ephemeris
  • Specifications: Link
    • ↑  

    Waspmote 3G/GPRS (SIM5218E)

  • Tri-Band UMTS 2100/1900/900MHz
  • Quad-Band GSM/EDGE, 850/900/1800/1900 MHz
  • HSDPA up to 7.2Mbps
  • HSUPA up to 5.76Mbps
  • Specifications: Link
    • ↑  

    PCB Waspmote Gateway

  • Can be equipped with ZigBees or other hardware
  • Programmable buttons and Leds
    • ↑  

    NFC Board

  • NFC/RFID reader/writer
  • Specifications: Link
    • ↑  

    Radio Expansion Board

  • Connect two radios at the same time
  • Use any of the six radios available for Waspmote: 802.15.4, ZigBee, Bluetooth, RFID, WiFi and GPRS
    • ↑  

    WiFi Module

  • 802.11 b/g radio for wireless communication
    • ↑  

    XBee 802.15.4 PRO SMA

  • IEEE 802.15.4 networking protocol
  • Indoor/Urban range up to 90 m
  • Outdoor/line-of-sight range up to 1.6 km
    • ↑  

    Bluetooth Module PRO

  • Bluetooth 2.1
  • Specifications: Link
    • ↑  

    Humidity Sensor

  • Specifications:Link
    • ↑  

    CO Gas Sensor

  • Specifications:Link
    • ↑  

    CO2 Gas Sensor

  • Specifications:Link
    • ↑  

    Temperature Sensor

  • Specifications:Link
    • ↑  

    LDR Sensor

  • Specifications:Link
    • ↑  

    Air Pollutants | Gas Sensor

  • Specifications:Link
    • ↑  

    NO2 Gas Sensor

    .
  • Specifications:Link
    • ↑  

    PIR Sensor

  • Specifications:Link
    • ↑  

    Ultrasound Sensor(indoor)

  • Specifications:Link
    • ↑  

    Dust Sensor

  • Specifications:Link
    • ↑  

    Weather Station WS-3000

  • Specifications:Link
    • ↑  

    Watermark Soil Moisture Sensor 1,5m.

  • Specifications:Link
    • ↑  

    Solar Radiation Sensor

  • Specifications:Link
    • ↑  

    Platinum Thermal Resistance Sensor

    ↑  

    RFID 13.56 MHz/NFC Stickers

    ↑  

    miniUSB Cable

    ↑  

    USB Extension Cable

    ↑  

    Solar Panel Cable

    ↑  

    Micro SD 2GB

    ↑  

    Waspmote Solar Panel 3W

    ↑  

    6600mA-h Rechargeable Battery

    ↑  

    Raspberry Pi and Arduino

    Raspberry Pi 2

  • 900MHz quad-core ARM Cortex-A7 CPU
  • 1GB RAM
  • 4 USB ports
  • 40 GPIO pins
  • Ethernet port
  • HDMI port
  • Specifications: Link
    • ↑  

    Raspberry Pi 3

  • 1.2GHz 64-bit quad-core ARMv8 CPU
  • 1GB RAM
  • 4 USB ports
  • 40 GPIO pins
  • Ethernet port
  • HDMI port
  • Specifications: Link
    • ↑  

    Arduino Uno

  • Specifications: Link
    • ↑  

    WiFi Connectivity Kit (Arduino)

  • Specifications: Link
    • ↑  

    MKR IoT Bundle (Arduino)

  • Specifications: Link
    • ↑  

    NodeMCU

  • Specifications: Link
    • ↑  

    40 in 1 SensorKit

  • Specifications: Link
    • ↑  

    Zephyr

    Zephyr BioHarness 3

  • User manual: Link
  • Heart rate
  • Heart Rate Variability
  • Respiration
  • 3-Axis Accelerometer
    • ↑  

    Smartphones

    Nexus 5

  • Specifications: Link
    • ↑  
     
     
    This website has several pages: Home, People, Research, Hardware, Gallery, Courses, Contact.